FlexLED II RGB-W 500 mm (19.69″) – flexible RGBW LED strip, IP67, 24 V DC
FlexLED II RGB-W 500 mm (19.69″) – flexible RGBW LED strip, IP67, 24 V DC
€47.40*
In stock 100 in stock
Need a quotation?
Create it yourself in three steps, no waiting for a reply:
- Register as a business customer and click the link in the confirmation email.
- Add the items and quantities you need to the cart.
- In the cart, click “Create PDF offer” and enter a subject (e.g. your project). Done.
The quotation is non-binding and valid for 30 days. You can order it later directly from your customer account.
The FlexLED II RGB-W is a flexible LED light strip with red, green, blue and white LEDs for machines, plants and workstations: it provides light and shows status in colour. Its flat design (14 mm / ~0.55″ wide, 5.5 mm / ~0.22″ high, 9 mm / ~0.35″ at the end caps) and self-adhesive backing (3M VHB adhesive tape) make installation simple; mounting clips are available separately as accessories.
- RGBW LEDs (SMD 5050) with a separate white channel: 5700 K, colour rendering Ra > 80, colour consistency 5-step MacAdam.
- Controlled via 24 V DC, digitally or with the LED2WORK RGB-W dimmer 210700-08 or 210700-09; the entire strip lights up uniformly (no segment or individual LED control).
- Direct light distribution with a 120° beam angle.
- Can be cut to length every 100 mm / ~3.94″ (7 LEDs).
- Degree of protection IP67 – dust-tight and protected against temporary immersion.
- Transparent silicone sheathing (VMQ/MVQ).
- M12 connector (A-coded, 5-pin) with 0.3 m / ~11.81″ lead.
- Operating temperature -20 °C to +50 °C (-4 °F to +122 °F), 50,000 hours lifetime at 24 V DC and 25 °C (77 °F) ambient temperature.
FlexLED II RGB-W
Work light and status signal in one.
Status you can see across the whole hall.
Shows the machine status across the whole hall – and provides white work light while everything is running.
Robot cell: Colour for the state of the cell, white for working inside it – visible across the whole hall.
Plug in instead of wiring up.
FlexLED II comes with an M12 plug connector (A-coded) – the same connector standard that has long been established for sensors and actuators in the plant. The luminaire becomes part of the wiring instead of a foreign body with its own terminal point.
RGB-W: 5-pin
Cut to length, simply stick on
FlexLED II RGB-W can be cut every 100 mm – after every 7 LEDs. Silicone adhesive for sealing the end caps is available as an accessory.
With the self-adhesive back (3M VHB tape), also on curved surfaces. A mounting clip set and a mounting profile set are available as accessories.
All lengths compared
| Length | Item no. | Luminous flux (white channel) | Power (white channel) | Weight | Price |
|---|---|---|---|---|---|
| 300 mm | 161090-02 | 370 lm | 3.6 W | 60 g (~2 oz) | €39.60* |
| 500 mm | 161090-03 | 592 lm | 5.7 W | 90 g (~3 oz) | €47.40* |
| 1 m | 161090-05 | 1184 lm | 11.5 W | 140 g (~5 oz) | €66.80* |
| 2 m | 161090-07 | 2369 lm | 23.0 W | 240 g (~8 oz) | €103.60* |
| 3 m | 161090-09 | 3396 lm | 33.3 W | 340 g (~12 oz) | €139.70* |
| 5 m | 161090-11 | 4600 lm | 46.0 W | 540 g (~19 oz) | €211.40* |
Temperature data
| Operating temperature: | -20 °C - +50 °C (-4 °F - 122 °F) |
|---|---|
| Storage temperature: | -30 °C - +80 °C (-22 °F - 176 °F) |
Conformity & markings
| WEEE reg. no.: | DE 38003906 |
|---|---|
| REACH: | SVHC < 0.1 % |
| RoHS Directive: | compliant |
| CE marking: | Yes |
| UKCA: | Yes |
| Warranty: | 24 months |
Lighting
| Illuminant: | SMD LED, 5050 RGBW |
|---|---|
| Dimmable: | Optional via LED2WORK accessories (see control) |
| Light colour: | Daylight white |
| Colour temperature: | 5700 K |
| Colour rendering (CRI): | Ra ≥ 80 |
| Light distribution: | Direct |
| LED density: | 70 LEDs/m (~21 LEDs/ft) |
| Luminaire luminous efficacy: | White channel ~103 lm/W |
| Light lifetime: | 50,000 h |
| Lifetime note: | Applies only at 24V DC nominal voltage and 25 °C (77 °F) ambient temperature. Higher supply voltages cause additional heating and may shorten the light lifetime. |
| Luminous flux, white channel: | 592 lm |
| Power consumption R: | 1.2 W |
| Power consumption G: | 1.3 W |
| Power consumption B: | 1.2 W |
| Power consumption W: | 5.7 W |
| Luminous flux R / G / B: | 44.4 lm / 182 lm / 37 lm |
| Light colour (white channel): | 5700 K, 5-step MacAdam |
| Colour rendering index (Ra, white channel): | >80 |
Electrical data
| Class of protection: | III |
|---|---|
| Connection (connector): | M12, 5-pin, A-coded, 0.3 m lead (~11.81″) |
| Supply voltage: | 24V DC (–10 % / +5 %) |
| Control: | 24V DC, digital or LED2WORK RGB-W dimmer 210700-08 or 210700-09 |
Dimensions & housing
| Type: | LED flex strip - signalling |
|---|---|
| Length [A]: | 500 mm (~19,69“) |
| Gross weight: | 150 g (~5 oz) |
| Mounting: | Self-adhesive (3M VHB tape); clips available separately as accessories |
| Material: | Transparent VMQ/MVQ silicone sheath |
| Degree of protection (IP): | IP67 |
| Width: | 14 mm (~0.55″) |
| Height: | 5.5 mm (~0.22″) (strip); 9 mm (~0.35″) (caps) |
| Cuttable: | every 100 mm (~3.94″) (7 LEDs) |
| Net weight: | 90 g (~3 oz) |
Further technical data
| Model: | FlexLED II RGB-W clear |
|---|---|
| Made in: | CN |
| Note: | The entire strip is controlled uniformly (no segment or individual LED control). Material: transparent silicone sheath, classified as VMQ/MVQ (vinyl methyl silicone rubber, ASTM D1418/ISO 1629). |
Info & explanations
ⓘ What does the colour temperature mean?
ⓘ What does the luminous flux (lumens) mean?
ⓘ What does the IP rating mean?
