24V DC fixed voltage switching power supply unit for DIN rail mounting for all LED2WORK 24V DC luminaires. The closed-type industrial PSU is attached to a top-hat rail using screw clamps. In addition to a wide input voltage range from approx. 90 - 264V AC and a stable output voltage of 24V DC, the power supply units suitable for LED2WORK luminaires are equipped with overvoltage protection and overtemperature protection. If the worst case, the output voltage is switched off to protect the user and can only be reactivated by switching it on again. When selecting a PSU, please note the power consumption and the connected load of your LED-luminaire. Are you unsure? Contact us beforehand.

24V DC fixed voltage switching power supply unit for DIN rail mounting for all LED2WORK 24V DC luminaires. The closed-type industrial PSU is attached to a top-hat rail using screw clamps. In addition to a wide input voltage range from approx. 90 - 264V AC and a stable output voltage of 24V DC, the power supply units suitable for LED2WORK luminaires are equipped with overvoltage protection and overtemperature protection. If the worst case, the output voltage is switched off to protect the user and can only be reactivated by switching it on again. When selecting a PSU, please note the power consumption and the connected load of your LED-luminaire. Are you unsure? Contact us beforehand.

Switching power supply unit, M12 socket/protective contact plug - 60W, 24V DC 24V DC PSU in industrial quality with M12 socket, fixed voltage 24V DC, 2.5A, 60 W, black cable, white housingVoltage converter with M12 socket, input 90V-264V AC via connection cable, input: 1.5 m with plug / output: fixed voltage 24V DC, 60 W, 30 cm cable with M12 socket A-coded, protection class IP67, extremely robust, long-lasting, even in difficult environments. The highlight: the connection cable can be disconnected and laid through a hole in a machine enclosure, for example. The connection cable is then reconnected via the secure screw coupling. The hole must have a diameter of at least 7.5 mm.Scope of delivery: Power supply unit with permanently connected cable and M12 A-coded connector as well as connection cable with earthing contact plug and screw coupling, 1.5 m

Compact AC / DC desktop PSU in industrial quality with a fixed output voltage of 24V DC for connection to LED2WORK 24V DC luminaires via M12 connector A-coded Voltage converter with M12 connector, input 110V-240V via IEC connection cable, 1.8 m, with SCHUKO plug, angled / IEC socket C13, output 24V DC, via cable, with M12 socket A-coded, extremely robust, long-lasting, even in difficult environments. Scope of delivery : Desktop PSU with permanently installed connection cable and M12 plug connector, A-coded, IEC cable with SCHUKO plug, angled

Compact AC/DC desktop power supply in industrial quality with an output fixed voltage 24V DC for connection to LED2WORK 24V DC luminaires via M12 connector A-codedVoltage converter with M12 connector, input 90...264V AC via cold device connection cable, , with SCHUKO plug, angled / cold device socket C13, output 24V DC, via cable, with M12 socket A-coded, extremely robust, long-lasting, even in difficult environments.Scope of delivery: table power supply with fixed connection cable and M12 connector A-coded, IEC cable with SCHUKO connector, angled

24V DC fixed voltage switching power supply for DIN rail mounting for all LED2WORK 24V DC luminaires.The industrial power supply in closed design is fixed to a DIN rail via screw terminals.In addition to a wide input voltage range of approx.  90...264V AC (125...375V DC) and a stable output voltage of 24V DC, the power supplies suitable for LED2WORK luminaires are equipped with overvoltage protection and overtemperature protection.When selecting a power supply unit, please pay attention to the indicated power consumption and the connected load of your luminaire. Are you unsure? Please contact us first.

Plug-in PSU with fixed voltage 24V DC for the connection of an LED2WORK light up to max. 36 watts These plug-in power supply units are specially made for our luminaires. The connection via the robust and user-friendly M12 connector ensures quick commissioning and the designated coding prevents any kind of incorrect connection. The compact plug-in switched-mode PSU itself has a high degree of efficiency and minimal no-load losses. The luminaire is simply connected via a cable with an M12 A-coded connector. The voltage converter is designed for normal use of luminaires at workplaces with an IP20 degree of protection and offers full output power without fan cooling. The power supply offers the plug-in / plug-out option to exchange the EU plug for an optional adapter plug. Scope of delivery: plug-in power supply unit with C-Euro plug and cable with M12 connector A-coded.

24V DC plug-in power supply with AC adapters,40 WUniversal plug-in power supply with 24V DC fixed voltage for connecting LED2WORK luminaires up to max. 40 W.This plug-in power supply is specially designed for our 24V DC luminaires with M12 connection. The connection via the user-friendly, reverse polarity protected M12-A coded plug connection ensures a quick start-up and prevents incorrect connections of any kind.The compact plug-in power supply itself has high efficiency and minimal no-load losses. The matching luminaire is simply connected via the M12 A-coded connector. The voltage converter is designed for normal use of luminaires in workplaces with IP20 protection and provides full output power without fan cooling.The power supply is universal because it offers the possibility to exchange AC connectors on the input side according to country or application. For this purpose, it is equipped with interchangeable AC plugs: American (US), European (EU), British (UK) and Australian (AU). The input voltage range is from 90V AC to 264V AC.Efficiency is up to 88% and the power supply has an extremely low power consumption of less than 0.075W at idle. The power supply complies with the latest US and EU energy regulations. Features- Ausgang mit Festspannung 24V DC- Interchangeable AC connectors- Universal AC input- No-load power consumption < 0.075 W- Protection class II- Overvoltage protection- Suitable for ambient temperatures from -30°C to + 70°C- LED indication when voltage is present- flame retardant plastic housingScope of delivery: fixed voltage plug-in power supply with input: AC adapter type US, type EU, type UK, type AU and output: M12-A socket straight and outgoing cable with M12 connector A-coded.

Additional metal adapter plates for mounting LEANLED II / SIGNALED II luminaire holders 210200- 18.

The M8 to M12 adapter is a connector specially designed for 24V DC applications. It is compatible with the TUBELED_25. With this connector you can make a quick and easy connection and trust in high quality and reliability.

Robust and heavy steel base plate for LED2WORK flexible arm luminaires with magnetic base. The magnetic base of the flexarm luminaire adheres securely to the plate and gives the luminaire stability. The luminaire head can be aligned as desired via the flexarm.

The stainless steel wire suspension transforms any LED2WORK luminaire with a rear T-slot profile into a pendant light! The suspension set consists of a pair of wire ropes with a cylindrical nipple at the end, the corresponding ceiling mounting set, and two grippers with M6 external threads as wire rope holders. It may look complicated, but the upper mounting is quite simple: The ceiling mounting for each set consists of two parts. Each wire rope is pulled through the central hole in the groove of the part with an external thread until it is stopped by the nipple at the end. Now, the part with the internal thread is screwed to the ceiling, and the first part with the threaded wire rope is screwed into this holder. On the luminaire: The external thread of the gripper is screwed into the M6 internal thread of a T-slot 10 stone, which is then inserted into the T-slot of the luminaire. Now, the end of each wire rope can be pulled through the gripper from above, and the luminaire can be adjusted to the desired suspension height. The wire rope is fixed at the desired height via the gripper without any additional tools. Scope of Delivery: 2x Wire rope, nickel-plated, 300 cm, Ø1.5 mm, with a cylindrical nipple on one side (shortenable on-site) 2x Ceiling mounting set 2x Gripper (wire rope holder) with knurling and M6 external thread, 8 mm long

Extremely strong holding magnet for the standard screw-on base of the LED luminaire series CENALED. This additional option turns every CENALED LED luminaire simply and safely into a magnetic luminaire or LED work luminaire with a magnetic base.

With the table clamp for the CENALED screw-on base, a CENALED SPOT flex arm, CENALED SPOT articulated arm or CENALED SPOT articulated head can be attached to tabletops with a top thickness of 15 mm up to 60 mm. Fixing options are as follows: The screw-on base of the LED luminaire can be screwed directly onto the retaining plate of the table clamp. If a magnetic clamp (220500-01) is already attached to the screw-on base, the retaining plate can be removed from the table clamp and the luminaire can be attached magnetically to the table clamp.

Bracket for wall mounting of a CENALED LED luminaire. The upper hole size is suitable for the screw-on base.

Compact AC / DC desktop PSU in industrial quality with a fixed output voltage of 24V DC for connection to LED2WORK 24V DC luminaires via M12 connector A-coded Voltage converter with M12 connector, input 110V to 240V via cold device connection cable, 1.8 m, with SCHUKO plug, angled / cold device socket C13, output 24V DC, via cable, with M12 socket A-coded, extremely robust, long-lasting, even in difficult environments.Scope of delivery : Desktop PSU with permanently installed connection cable and M12 plug connector, A-coded, IEC cable with SCHUKO plug, angled

The DIMMbox RGB-W is a 4-channel dimmer with a power rating of max. 96 W and a passing voltage of 24V DC. The maximum current load is 4000 mA. The pin assignment is as follows: PIN 1 Input/Output: 24V DC / -, PIN 2 Input/Output: digital input / -, PIN 3 Input/Output: GND / GND, PIN 4 Input/Output: digital input / +24V out, PIN 5 Input/Output: digital input / -.Brightness control is via external control. The input/output is achieved through an M12 socket / M12 plug A coded. The driver unit is external. The protection rating is IP54, and the protection class is III. The dimmer operates reliably in a temperature range of -20 °C - +50 °C (-4 °F - 122 °F).The dimensions are 122 mm x 38 mm x 29 mm (~4,8“ x ~1,5“ x ~1,14“), with a weight of 450 g (~16 oz) and a gross weight of 500 g (~18 oz). A special feature is that the DIMMbox is controlled via an external controller, e.g. PLC.

LED2WORK DIMMbox with rotary knob and ON/OFF switch. The DIMMbox is made of: Casing: ABS The DIMMbox is equipped with an M12 input (socket, A-coded) and an M12 output (plug, A-coded). The brightness is controlled via an integrated rotary potentiometer. For easy installation, the DIMMbox can be mounted directly onto T-slot profiles thanks to its mounting tabs. This module is ideal for dimming LED2WORK 24V DC lights with an A-coded M12 connection (except RGB models) and supports a power of max. 96 W.

LED2WORK DIMMbox with rotary knob and ON/OFF switch. The DIMMbox is made of: Casing: ABS The DIMMbox is equipped with an M12 input (socket, A-coded) and an M12 output (plug, A-coded). The brightness is controlled via an integrated rotary potentiometer. For easy installation, the DIMMbox can be mounted directly onto T-slot profiles thanks to its mounting tabs. This module is ideal for dimming LED2WORK 24V DC lights with an A-coded M12 connection (except RGB models) and supports a power of max. 144 W.

DOMELED light holder V2A Secure your DOMELED light with this high-quality and robust light holder. Made from Stainless steel, this holder ensures reliable attachment, even under demanding conditions. Its compact design makes it versatile and provides a durable solution for your lighting needs.

Grey sensor cable, 10 m, Food + Beverage suitable, 5 m, 4-core, with M12 socket A-coded on one side and four open cable ends on the other side. Entire cable made of FDA-approved material: cable TPE, seal EPDM, plug connections and union made of stainless steel. For connecting LED2WORK 24V DC luminaires with M12-A connection. (RGB and RGB-W luminaires require a 5-core sensor cable for the signal function).

Grey sensor cable, 5 m, Food + Beverage suitable, 5 m, 4-wire, with M12 socket A-coded on one side and M12 plug A-coded on the other side. Entire cable made of FDA-approved material: cable TPE, seal EPDM, connectors and union made of stainless steel. For connecting LED2WORK 24V DC luminaires with M12-A connection. (RGB and RGB-W luminaires require a 5-core sensor cable for the signal function).

Grey sensor cable, 5 m, Food + Beverage suitable, 5 m, 4-wire, with M12 socket A-coded on one side and four open cable ends on the other side. Entire cable made of FDA-approved material: cable TPE, seal EPDM, plug connections and sleeve made of stainless steel.For connecting LED2WORK 24V DC luminaires with M12-A connection. (RGB and RGB-W luminaires require a 5-core sensor cable for the signal function) .

Mounting bracket made of stainless steel for flat mounting of the LED machine light FIELDLED EVO structure.The end covers of the FIELDLED EVO each have 2 threaded holes through which the luminaire is fastened to the bracket with screws.