161 available
Adapter for luminaire holder LEANLED II/ SIGNALED II, 1 pair
€6.40*
Additional metal adapter plates for mounting LEANLED II / SIGNALED II luminaire holders 210200- 18.
Order no.
210200-19
89 available
Base plate for magnetic base luminaires
€28.90*
Robust and heavy steel base plate for LED2WORK flexible arm luminaires with magnetic base. The magnetic base of the flexarm luminaire adheres securely to the plate and gives the luminaire stability. The luminaire head can be aligned as desired via the flexarm.
Order no.
220200-03
19 available
Cable suspension for luminaires with T-slot profile (1 pair)
€35.70*
The stainless steel wire suspension transforms any LED2WORK luminaire with a rear T-slot profile into a pendant light! The suspension set consists of a pair of wire ropes with a cylindrical nipple at the end, the corresponding ceiling mounting set, and two grippers with M6 external threads as wire rope holders. It may look complicated, but the upper mounting is quite simple: The ceiling mounting for each set consists of two parts. Each wire rope is pulled through the central hole in the groove of the part with an external thread until it is stopped by the nipple at the end. Now, the part with the internal thread is screwed to the ceiling, and the first part with the threaded wire rope is screwed into this holder. On the luminaire: The external thread of the gripper is screwed into the M6 internal thread of a T-slot 10 stone, which is then inserted into the T-slot of the luminaire. Now, the end of each wire rope can be pulled through the gripper from above, and the luminaire can be adjusted to the desired suspension height. The wire rope is fixed at the desired height via the gripper without any additional tools.
Scope of Delivery:
2x Wire rope, nickel-plated, 300 cm, Ø1.5 mm, with a cylindrical nipple on one side (shortenable on-site)
2x Ceiling mounting set
2x Gripper (wire rope holder) with knurling and M6 external thread, 8 mm long
Order no.
213300-02
315 available
CENALED magnetic clamp for screw-on base
€30.70*
Extremely strong holding magnet for the standard screw-on base of the LED luminaire series CENALED. This additional option turns every CENALED LED luminaire simply and safely into a magnetic luminaire or LED work luminaire with a magnetic base.
Order no.
220500-01
9 available
CENALED table clamp for screw-on base
€28.10*
With the table clamp for the CENALED screw-on base, a CENALED SPOT flex arm, CENALED SPOT articulated arm or CENALED SPOT articulated head can be attached to tabletops with a top thickness of 15 mm up to 60 mm. Fixing options are as follows: The screw-on base of the LED luminaire can be screwed directly onto the retaining plate of the table clamp. If a magnetic clamp (220500-01) is already attached to the screw-on base, the retaining plate can be removed from the table clamp and the luminaire can be attached magnetically to the table clamp.
Order no.
220500-02
78 available
CENALED wall bracket for screw-on base
€19.70*
Bracket for wall mounting of a CENALED LED luminaire. The upper hole size is suitable for the screw-on base.
Order no.
220500-03
263 available
DOMELED light holder V2A
€18.44*
DOMELED light holder V2A
Secure your DOMELED light with this high-quality and robust light holder. Made from Stainless steel, this holder ensures reliable attachment, even under demanding conditions. Its compact design makes it versatile and provides a durable solution for your lighting needs.
Order no.
210200-30
38 available
FIELDLED EVO adapter plate on articulated head for Lumatris
€57.50*
Adapter plate for mounting a FIELDLED EVO LED machine light on an existing standard articulated head on the machine.Mounting on articulated head plate with 4x M6 screws, screw-on dimension 62 mm x 62 mm (~2.44‘ x ~2.44’) Attach FIELDLED EVO to adapter plate via the screw channels on the back of the luminaire and 4x M5 screws.Screws included in the scope of delivery.
Order no.
210200-35
413 available
FIELDLED EVO light holder, flat (1 pair)
€13.10*
Mounting bracket made of stainless steel for flat mounting of the LED machine light FIELDLED EVO structure.The end covers of the FIELDLED EVO each have 2 threaded holes through which the luminaire is fastened to the bracket with screws.
Order no.
210200-20
1 available
INROLED 50 luminaire holder for Food & Beverage (1 pair)
€59.60*
Light holders for Food & Beverage, cleanroom applications, or other hygiene-sensitive areas, specifically designed for INROLED_50 Ecolab (old version) and INROLED CleanPro (new version).
Order no.
210200-09
> 500 available
INROLED 50 Luminaire support, screw-on base + cable tie (1 pair)
€6.20*
Universal and safe: Simple but effective luminaire holder. F+B suitable! Metal-detectable for greatest safety: The entire luminaire holder is made of metal-detectable plastic and even the smallest pieces are detectable with a metal detector, thus enabling greater safety in food production.
Order no.
210200-13
Available again soon
INROLED 50 spring terminal, suitable for Food & Beverage applications (1 pair)
€32.00*
INROLED 50 spring terminal, suitable for Food & Beverage applications (1 pair)The INROLED_50 Ecolab spring clamp is the perfect solution for anyone who wants to securely and easily mount their INROLED_50 Ecolab and INROLED_50 Ecolab RGB-W luminaires. Made of sturdy, Material: stainless steel 1.4301 (chrome-nickel steel), this spring clamp guarantees a long life and high resistance to environmental influences.Suitable for use in the food & beverage industry, the INROLED_50 Ecolab spring clamp meets the highest hygiene requirements. The clamp fastening enables quick and uncomplicated mounting on the luminaire, which saves time and costs.With the INROLED_50 Ecolab spring clamp from LED2WORK GmbH you can be sure that your luminaires are fixed reliably and stably.
Order no.
210200-29
90 available
INROLED 50 spring terminals (1 pair)
€4.40*
1 pair of spring clips for mounting the INROLED_50 Ecolab industrial LED light and other LED lights with a diameter of 50 mm. The distance at which the brackets are fixed depends on the length of the selected luminaire.
Order no.
210200-17
129 available
LEANLED / SIGNALED Luminaire holder, spring clip with magnet (1 pair)
€12.50*
The luminaire holder made of spring steel for the LEANLED and SIGNALED luminaires has been extended by two strong permanent magnets and thus offers the possibility of fixing a luminaire non-destructively. The aluminium profile on the back of the LED luminaire is clipped into the spring clips attached to the magnet and the luminaire itself can thus be used on any magnetically adhesive surface. The bracket is suitable for the surface-mounted luminaires LEANLED, LEANLED II, SIGNALED, SIGNALED II.
Order no.
210200-08
> 500 available
LEANLED / SIGNALED Luminaire support, spring clip (1 pair)
€2.90*
A luminaire holder made of galvanised spring steel, suitable for the LEANLED and SIGNALED luminaires. The rear aluminium profile of the LED luminaire is simply clipped into the mounted spring clips and thus even withstands strong vibrations. The bracket is suitable for the surface-mounted luminaires LEANLED, LEANLED II, SIGNALED, SIGNALED II.
Order no.
210200-07
20 available
LEANLED II / SIGNALED II light holder
€6.90*
1 pair of stainless steel mounting brackets, suitable for the LEANLED II light and SIGNALED II light series.The brackets allow flush-mounted positioning of the light.
Order no.
210200-34
98 available
LEANLED II/SIGNALED II luminaire holders (2 pairs)
€6.60*
Spare part: Luminaire holder set for the LEANLED II and SIGNALED II RGB stick lights.One pair of short luminaire holders for flat mounting and one pair of tall luminaire holders for swivelling mounting, locking in the holder in 15° steps. These luminaire holders made of plastic are included with every LEANLED II or SIGNALED II RGB.
Order no.
210200-18
199 available
LENSLED II / UNILED II screw-on base
€11.20*
New screw-on base for direct mounting of the LED lights with articulated arm UNILED II and LENSLED II on a workplace. The screw-on base is screwed directly onto the surface of the table. It thus serves as a base for the articulated arm luminaire, excluding the supplied table clamp.The screw-on base is suitable for using an existing hole pattern of 60 mm x 60 mm on the worktop.Scope of delivery:
Order no.
215400-03
18 available
LENSLED II / UNILED II T-slot bracket
€74.20*
This bracket is suitable for system installations with T-slot profiles. This luminaire holder can be used to mount the UNILED II and LENSLED II articulated arm luminaires on T-slot aluminium profiles.
Order no.
215200-01
Available again soon
LENSLED II / UNILED II Table clamp for articulated arm lamp (spare part)
€27.10*
Table clamp (spare part) for all articulated arm lamps UNILED II and LENSLED II. For clamp attachment to a tabletop with a thickness of 18 mm to 73 mm.
Order no.
215600-01
20 available
LENSLED II / UNILED II wall bracket
€63.40*
Luminaire holder for direct wall mounting of an LED articulated arm luminaire UNILED II and LENSLED II
Order no.
215100-01
310 available
Light holder, swivelling 150°, 1 pair for FIELDLED EVO 96 mm wide
€17.60*
Mounting bracket made of stainless steel for swiveling mounting of the LED machine luminaire FIELDLED EVO structure. 2 threaded holes are located in each of the end covers of the FIELDLED EVO via which the luminaire is fastened to the bracket with screws. With slightly loosened screws, the FIELDLED EVO can be aligned in the radius of 150° in the inclination and then fixed.
Order no.
210200-21
65 available
Light holder, swivels 150°, 1 pair for FIELDLED EVO 150 mm wide
€19.20*
Mounting bracket made of stainless steel for swiveling mounting of the LED machine light FIELDLED EVO surface-mounted in the width of 150 mm. In the end covers of the FIELDLED EVO there are 2 threaded holes each via which the luminaire is fastened to the mounting bracket with screws. With slightly loosened screws, the FIELDLED EVO can be aligned in the radius of 150 ° in the inclination and then fixed.
Order no.
210200-22
301 available
Luminaire holder set, magnetically adhesive (1 pair)
€17.40*
Non-destructive mounting for LED2WORK luminaires!The strongly magnetically adhering pair of permanent magnets in combination with a listed luminaire holder guarantees a safe and non-destructive mounting for almost all machine, signal and industrial luminaires, provided they can be attached to surfaces with good magnetic adhesion. The magnet itself is either attached to the luminaire holder or directly to the luminaire.Delivery includes M5 screws DIN 912.
Order no.
210200-05