Cable suspension for luminaires with T-slot profile (1 pair)
The stainless steel wire suspension transforms any LED2WORK luminaire with a rear T-slot profile into a pendant light! The suspension set consists of a pair of wire ropes with a cylindrical nipple at the end, the corresponding ceiling mounting set, and two grippers with M6 external threads as wire rope holders. It may look complicated, but the upper mounting is quite simple: The ceiling mounting for each set consists of two parts. Each wire rope is pulled through the central hole in the groove of the part with an external thread until it is stopped by the nipple at the end. Now, the part with the internal thread is screwed to the ceiling, and the first part with the threaded wire rope is screwed into this holder. On the luminaire: The external thread of the gripper is screwed into the M6 internal thread of a T-slot 10 stone, which is then inserted into the T-slot of the luminaire. Now, the end of each wire rope can be pulled through the gripper from above, and the luminaire can be adjusted to the desired suspension height. The wire rope is fixed at the desired height via the gripper without any additional tools.
Scope of Delivery:
- 2x Wire rope, nickel-plated, 300 cm, Ø1.5 mm, with a cylindrical nipple on one side (shortenable on-site)
- 2x Ceiling mounting set
- 2x Gripper (wire rope holder) with knurling and M6 external thread, 8 mm long
| Order number: | 213300-02 |
|---|---|
| Model: | Lamp Holder Suspension |
| Type: | Rope suspension |
| Amount: | 1 pair |
| Suitable for: | PROFILED, SYSTEMLED, FIELDLED II |
| Attachment to a luminaire: | Gripper wird in T-Nut 10 Stein geschraubt |
| Material: | Material: Steel, partially nickel-plated |
| Weight (net): | 150 g (~5 oz) |
| Gross weight: | 200 g (~7 oz) |
| Feature: | light, unobtrusive ceiling mounting |
| Note: | without T-slot stone |
