The M8 to M12 adapter is a connector specially designed for 24V DC applications. It is compatible with the TUBELED_25. With this connector you can make a quick and easy connection and trust in high quality and reliability.
Grey sensor cable, 10 m, Food + Beverage suitable, 5 m, 4-core, with M12 socket A-coded on one side and four open cable ends on the other side. Entire cable made of FDA-approved material: cable TPE, seal EPDM, plug connections and union made of stainless steel. For connecting LED2WORK 24V DC luminaires with M12-A connection. (RGB and RGB-W luminaires require a 5-core sensor cable for the signal function).
Grey sensor cable, 5 m, Food + Beverage suitable, 5 m, 4-wire, with M12 socket A-coded on one side and M12 plug A-coded on the other side. Entire cable made of FDA-approved material: cable TPE, seal EPDM, connectors and union made of stainless steel. For connecting LED2WORK 24V DC luminaires with M12-A connection. (RGB and RGB-W luminaires require a 5-core sensor cable for the signal function).
Grey sensor cable, 5 m, Food + Beverage suitable, 5 m, 4-wire, with M12 socket A-coded on one side and four open cable ends on the other side. Entire cable made of FDA-approved material: cable TPE, seal EPDM, plug connections and sleeve made of stainless steel.For connecting LED2WORK 24V DC luminaires with M12-A connection. (RGB and RGB-W luminaires require a 5-core sensor cable for the signal function) .
With this sensor/actuator connecting plug, a sensor cable for our 24V DC LED luminaires can be assembled to the desired length. The 4-pole M12 connector in the straight plug version is mounted on the open ends of a sensor cable for 24V DC available here.For assembly: The connector is mounted on a sensor cable up to 6 mm thick for power supply with wire cross-sections between 0.25 mm² and 0.75 mm². Inside the cable socket, the cables are fixed by means of screw terminals, AWG 18, and the cable is secured by a Pg7 cable gland. The IP67 protection class in the assembled state then enables the safe use of LED luminaires in lostic and packaging technology as well as in factory automation and special machine construction.
This sensor/actuator connector is for self making a connection socket for 24V DC LED luminaires with M12 A-coded connection. The 4-pole M12 connector in the straight socket version is plugged into the M12 connection of the luminaire and fixed via the metal wheel.Configuration: The connector is mounted on a cable with a diameter of 4 to 6 mm for power supply with cable cross-sections between 0.25 mm² and 0.75 mm². Inside the cable socket, the cables are fixed by means of screw terminals, AWG 18, and the cable is secured by a Pg7 cable gland. The protection class IP67 in the assembled state enables the use of the connector on LED luminaires in lost and packaging technology as well as in factory automation and special mechanical engineering.
This sensor/actuator connector is for self making a connection socket for 24V DC LED luminaires with M12 A-coded connection. The 4-pole M12 connector in the straight socket version is plugged into the M12 connection of the luminaire and fixed via the metal wheel.Configuration: The connector is mounted on a cable with a diameter of 4 to 6 mm for power supply with cable cross-sections between 0.25 mm² and 0.75 mm². Inside the cable socket, the cables are fixed by means of screw terminals, AWG 18, and the cable is secured by a Pg7 cable gland. The protection class IP67 in the assembled state enables the use of the connector on LED luminaires in lost and packaging technology as well as in factory automation and special mechanical engineering.
With this sensor/actuator connecting plug, a sensor cable for our 24V DC LED luminaires can be assembled to the desired length. The 4-pole M12 connector in the straight plug version is mounted on the open ends of a sensor cable for 24V DC available here.For assembly: The connector is mounted on a sensor cable up to 6 mm thick for power supply with wire cross-sections between 0.25 mm² and 0.75 mm². Inside the cable socket, the cables are fixed by means of screw terminals, AWG 18, and the cable is secured by a Pg7 cable gland. The IP67 protection class in the assembled state then enables the safe use of LED luminaires in lostic and packaging technology as well as in factory automation and special machine construction.
This S-code type M12 connector is suitable for AC power supply. Designed with 4 pins, i.e. 3+PE contacts with a rated current of 12 A at 630V AC, it is intended for the M12 connections used with our 220V LED luminaires. The M12 connector in the straight socket version is plugged into the M12 connection of the luminaire and fixed via the metal wheel. The coding prevents incorrect plugging.Configuration: The connector is mounted on a cable with a diameter of 8 to 10 mm for power supply with cable cross-sections of up to 1.5 mm². Inside the cable socket, the wires are fastened by means of screw terminals, AWG 18, and the cable is secured by a cable gland.Safety noteThe connector is intended for use on an LED2WORK luminaire with M12 connection, S-code type.This connector must not be plugged or unplugged under load. Failure to comply and improper use may result in personal injury.Connectors may only be installed by persons with electrical engineering training and in compliance with the applicable regulations.The user must take appropriate safety precautions to ensure that the connector cannot be accidentally disconnected.Connectors with protection class IP 67 are not designed for use under water.
Whether cover plug, protective cap or skin top, the black protective plug is for protecting unused M12 plugs on operating devices or cables so that they do not become dirty or come into contact with moisture.
The M8 connector is a socket that is especially suitable for 24V DC applications. It is compatible with the TUBELED_25. With this connector, you can establish a quick and easy connection and rely on high quality and reliability.
The M8 protective cap in black is the ideal solution for protecting and covering M8 sockets. This protective cap is perfect for various applications and ensures that your sockets remain safe and clean. Rely on quality and protection with the M8 protective cap.
The adapter from M8 socket to M12 plug is an efficient connection solution for your lighting systems. This 5-pole adapter is designed for an operating voltage of 24V DC.
The adapter with M8 socket to M12 plug is a practical solution for connecting lighting components with different plug connections. This 4-pole adapter is specially designed for an operating voltage of 24V DC.
Mains cable PVC, 3 m, black, earth plug, angled/open cable ends, 220-240V AC, Three-core PVC sheathed cable with firmly moulded earth plug on one side and open cable ends for connection on the other side.Cable cross-section 3 x 0.75 mm. 3 m cable, black
Mains cable PVC, 5m, black, earth plug, angled/open cable ends, 220-240V AC, three-core PVC sheathed cable with firmly moulded earth plug on one side and open cable ends for connection on the other side.Cable cross-section 3 x 0.75 mm. 5 m cable, black.
RGB-W reverse polarity, A-coded is a high-quality adapter with 5 poles. It is characterized by a rated voltage of 60V.With a current capacity of 4 A, our polarity changer offers sufficient capacity for use in various applications. It is ideal for controlling RGB-W LEDs.
Gray sensor cable, 5 m, Food + Beverage suitable, 5 m, 5-core, with M12 socket A-coded on one side and five open cable ends on the other side. Entire cable made of FDA approved material: cable TPE, gasket EPDM, connectors and union made of stainless steel.
24V DC sensor cable, 10 m (~32,81 ft.), black, 3-wire, with M8 female connector on one side and 3 open cable ends on the other side.For connection of Tubeled_25 lights.
24V sensor cable, 10 m, PUR, black, 4-core, with M12 socket A-coded on one side and four open cable ends on the other side.For connecting LED2WORK 24V DC luminaires with M12-A connection. (RGB and RGB-W luminaires require a 5-core sensor cable for the signal function)
24V DC sensor cable, 10 m (~32,81 ft.), black, 5-wire, with M8 female connector on one side and 5 open cable ends on the other side.For connection of Tubeled_25 RGB-W lights.
24V DC sensor cable, 10 m, black, 4-wire, with M12 socket A-coded on one side and M12 plug A-coded on the other side.For connecting LED2WORK 24V DC luminaires with M12-A connection. (RGB and RGB-W luminaires require a 5-core sensor cable for the signal function)
Order no.
200100-03
€29.30*
Worldwide Shipping
Fast shipping
Directly from the manufacturer
Made in Germany
EU Ecodesign (ErP) compliant
This website uses cookies to ensure the best experience possible. More information...
Notifications are disabled by your browser
Please enable push notifications in your browser settings.